Asus MES-N User Manual page 34

3. HARDWARE SETUP
5) LCD Header (20-1 pin LCDHD)
This header requires a digital LCD cable connector. Connect the digital LCD
cable to the LCD header and mount the bracket to the chassis on a free expan-
sion slot. NOTE: If both CRT and digital LCD monitors are used, the CRT will
take precedence. This header is for a digital LCD panel; an analog LCD panel
comes with a 15-pin VGA cable connector to be used on the monitor connector.
NOTE: This connector is available only on motherboards with optional Digital
Flat Panel (DFP) interface support.
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N LCD Header
34
LCDHD
20 10
11 1
ASUS MES-N User's Manual
20: (No pin) 10: (No connection)
19: (No connection) 9: GND
18: TX2+ 8: TX2-
17: GND 7: TX1+
16: TX1- 6: GND
15: TX0+ 5: TX0-
14: GND 4: TXC+
13: TXC- 3: GND
12: +5V 2: PLSENSE
11: FDDCDAT 1: FDDCCLK