Pointing Device; Power - Gateway MX6708h Reference Manual

Pointing device

See

Power

Your notebook is not working on AC power
•
•
•
Your notebook is not working on battery power
•
•
•
•
•
126
CHAPTER 9: Troubleshooting
"Touchpad or pointing device" on page
Make sure that your AC power adapter is connected
correctly to your notebook. For instructions on
connecting the AC power adapter, see
AC adapter" on page
If your notebook is plugged into a surge protector, make
sure that the surge protector is connected securely to
an electrical outlet, turned on, and working correctly.
To test the outlet, plug a working device, such as a lamp,
into the outlet and turn it on.
Make sure that the AC power adapter cables are free
from cuts or damage. Replace any damaged cables.
Check the power management settings. For more
information about using power management settings,
see "Changing notebook power settings" on page
Make sure that the main and optional secondary battery
are installed correctly. For instructions on inserting your
battery(ies), see
Make sure that the battery(ies) are fully recharged. For
more information about recharging the battery(ies), see
"Recharging the battery(ies)" on page
Make sure that the battery(ies) are calibrated correctly.
For instructions on recalibrating your battery(ies), see
"Recalibrating the battery(ies)" on page
Let the battery(ies) return to room temperature.
16.
"Changing batteries" on page
129.
"Connecting the
65.
59.
58.
61.