The optical disc tray does not open for removal of a CD or
DVD
1.
Insert the end of a paper clip (1) into the release access in the front bezel of the drive.
2.
Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it
stops.
3.
Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
4.
Close the disc tray and place the disc in a protective case.
If the tray is not fully accessible, tilt the disc carefully as you remove it.
The optical disc tray does not open for removal of a CD or DVD
21
Need help?
Do you have a question about the 6535b - Notebook PC and is the answer not in the manual?
Questions and answers