Power Supply; Safety Information - Lexmark Z52 Color Jetprinter User Manual

Steps to basic printing
Beyond the basics
Maintaining your printer
Troubleshooting
Appendix
Index
Energy Star
The EPA ENERGY STAR
Computers program is a
partnership effort with computer
manufacturers to promote the
introduction of energy-efficient
products and to reduce air pollution
caused by power generation.
Companies participating in this
program introduce personal
computers, printers, monitors, or
fax machines that power down
when they are not being used. This
feature will cut the energy used by
up to 50 percent. Lexmark is proud
to be a participant in this program.
As an Energy Star Partner,
Lexmark International, Inc. has
determined that this product meets
the Energy Star guidelines for
energy efficiency.

Power supply

If your power supply fails, replace it
with the Lexmark replacemnet part
or other UL LISTED Direct Plug-In
Power Unit marked "Class 2" and
rated 30 Vdc at 1A.
54
Appendix

Safety Information

• If your product is NOT marked
with this symbol , it MUST be
connected to an electrical outlet
that is properly grounded.
• The power cord must be
connected to an electrical outlet
that is near the product and
easily accessible.
• Refer service or repairs, other
than those described in the
operating instructions, to a
professional service person.
• This product is designed, tested
and approved to meet strict
global safety standards with the
use of specific Lexmark
components. The safety
features of some parts may not
always be obvious. Lexmark is
not responsible for the use of
other replacement parts.