Toshiba P42LSB Service Manual page 25

In COLOR adjust, this is the same to Main
Setting but for PiP image. As same as the
Adjustments in previous page, any adjustment
will reflect to the Main Image when selected.
This is because there in only one adjustment
value memory for each input.
PiP Setting, COLOR and PiP CONTROL
In PiP CONTROL Menu page, adjustment item
is selected by [Up]/[Down] key, then adjustment
or selection is by [Left]/[Right] keys.
OSD Setting menu page
OSD Horizontal/Vertical: OSD position adjustments
Blend: OSD appears semi-transparent to blend with original picture information. Adjustment changes
the amount of transparency.
Time out: This displays how many seconds the OSD remains on before disappearing. When set to Zero,
OSD will display continuously.
Screen reference line: Center cross, 5%, 10%, Quarter and 4:3 lines can be displayed. All is all except Qtr.
OSD Zoom: OSD image size has two selections, large and small.
Above right indicates Screen Reference line high-lighted. Individual selection of Center Cross, 5%, 10%,
4:3 and then, also all the lines are possible to display by different colors. These lines are possible to
display even in Normal mode (right now, it is in Adjust mode) by using [UP] button, then [EXIT] to off.
This below picture shows PiP CONTROL.
Adjustment item selection is done by [Down] key for.
PiP on-off, Size and its position.
By doing this operation, only small picture within
window can be controlled.
This picture below, next page, shows that OSD is
selected. Item selection is by [Up]/[Down] and
adjustment is by [Left]/[Right] keys.
25
WIRELESS REMOTE CONTROL OPERATION