Toshiba P42LSB Service Manual page 24

Lcd flat panel data display unit
Table of Contents

Advertisement

Picture below right shows the COLOR mode, this is to select Gamma Correction for Off-Expand-Compress
and Color temperature 3200K/5400K/6500K/9300K and User. At User position, RGB adjustments are
possible using User Color R,G,B adjustment selection.
To do one of these adjustment, [DOWN] key to high-light the selection and use [LEFT] or [RIGHT]
for value. Also [UP] key will return back to the other adjustment.
when escape from any adjustment, [EXIT] key is to be used.
As for the Color Temperature selection, please note that the color temperature selections are not
selecting the lamp temperature but change adjustment value as increased R, G or B or even decrease,
thus it will show as like as such color but quasi color makings, not changing lamp color temperature
by this adjustment, such adjustment of lamp color is impossible with this model.
When different color temperature is selected, Red, Green and Blue bars indicate respectable signal
level by bar length and at right, adjustment value numbers.
PiP (Picture in Picture) Setting menu page
.
This page enable to make PiP picture selection and adjustment of color etc.. Below left shows the
Input selection, a composite Video is selected and right picture shows the PiP picture adjustments.
They are similar to the main menu but when if some adjustments are done in this PiP page, the adjusted
Value will reflect back to the original main video picture when Video is selected for main Image.
PiP Setting, Input selection Menu page
PiP Setting, Picture adjustment DISPLY is selected
24
WIRELESS REMOTE CONTROL OPERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

P47lsbP42lsa+P47lsa+

Table of Contents