Toshiba P42LSB Service Manual page 14

FUNCTION OF I/O PANEL
Input / Output terminals of LSB model (HD-SDI)
Input / Output terminals of LSA+ model
Note:
1. Only DVI-D signal is used at DVI input terminal, no analog pins are used internally.
2. In any occasion, the basic idea of cable length is, "shorter are better". If the signal supply or
command wires become longer, use better quality cable to avoid signal loss or degrade the
signal components. Supplied cables are not the best quality for daisy chain using adaptors.
Note:
1. BNC, Category-5, Video cables are not
included.
2. DVI terminal Analog input is not used.
3. Catrgory-5 input/output are Link only,
external signal is not properly be worked.
4. Y-Cb-Cr input works up to 480p but not
for higher resolutions. For 720p/1080i
use RGB input instead.
14