Problem
Improper cut sheet feed (cont.)
Paper distortion.
Unable to eject.
Improper continuous forms feed
No line feed, and
no paper feed.
Cause
Sheets are not
loaded to the end,
or they are not
inserted straight.
Paper with
wrinkles, folds or
other defects.
Paper not specified
for the printer.
The FF/LOAD
button is pressed.
Paper is off the Pin
Tractors.
The adjust lever
position does not
match the paper
type.
Troubleshooting > 53
Action
Load sheets to the
end.
Change paper.
Use paper types
specified for the
printer.
Press the PARK
button.
Reload paper
correctly.
Set the adjust lever to
the correct position.