Advertisement
ASSEMBLY
b
Set the tone bars.
5-1. Set the natural tone bars first.
With one person holding the suspension cords on the bass side and the other holding the suspen-
sion cords on the treble side securely with both hands, gently place the tone bars on the rails. Align
each tone bar individually and hook its cord onto the corresponding post. After confirming that the
cord is secured to every post, fix the tone bars by pulling the right and left cords forward from the
large end side and hooking the two springs into each other.
* When setting the tone bars, use care not to cause any damage to them.
Small end
YM-5100A/4900A Only
5-2. Each of F#
22
bar, move the resonance regulator to find the position where the best resonance is obtained and fix
it there.
* When fixing the resonance regulator, check to ensure that it is not aslant.
28
Suspension cord
Post
, G
, G#
A
and A#
23
24,
25
26
resonators has a resonance regulator. While tapping each tone
Resonance regulator
Large end
Suspension cord
Advertisement
