Table of Contents
Advertisement
4-3. Color Adjustment
The "ColorManagement"menu in the ScreenManager enables to change the color of the
screen.
Before the Color adjustment
• Allow the LCD monitor to stabilize for at least 20 minutes before making color
adjustments.
• After finishing each adjustment in the custom mode, select "Save" icon to resister the
adjustment. Otherwise, the adjustment will be lost.
• The adjustment values represent the current level within the specific adjustment only.
They are available only as a reference tool. (To create a uniform white or black
screen, the percentages for each will probably not be the same.)
• In the analog input, perform the "Range Adjustment" (p.21) before making the color
adjustments . The gradation pattern like below is recommended for the "Range
Adjustment".
1.
To change the color tone of the white.
The "Temperature" can be set from 4,000 K to 10,000 K , in 500 K increments
(including 9,300 K). The default setting is "OFF".
To resister the adjustment in the custom mode, select the "Save" icon and then push
the enter button.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the color
temperature setting. (The color temperature's setting turns "OFF".)
• Adjusting the "Gain" (p. 25) invalidates the color temperature setting. (The
color temperature's setting turns "OFF".)
24
4. ADJUSTMENT
Set the "Temperature".
p.35)
Advertisement
Table of Contents
