Yamaha mLAN Installation Manual page 7

Mlan driver / mlan tools for mac os x installation guide
Hide thumbs Also See for mLAN:
Table of Contents

Advertisement

Using the mLAN Auto Connector
The mLAN Auto Connector enables you to make or change connections between a Macintosh computer and an mLAN device just
simply by selecting a desired device from the Devices menu then executing the Connect to Mac command.
If you wish to use two or more mLAN devices simultaneously and connect their audio/MIDI channels one by one, use mLAN
Graphic Patchbay instead of mLAN Auto Connector. For more information on mLAN Graphic Patchbay, see
• Do not use mLAN Auto Connector and mLAN Graphic Patchbay at the same time. If you attempt to do so, the later booting application will be
unable to recognize any mLAN devices.
CAUTION
• Never execute the following operations while the mLAN Driver is being used with the application software (such as DAW).
- Starting or exiting mLAN Auto Connector or mLAN Graphic Patchbay.
- Turning the power on/off to the mLAN devices.
- Connecting/disconnecting the FireWire cable.
1
Power on the mLAN device or devices, then make the necessary settings.
Please keep in mind that only the Macintosh computer can be the wordclock master.
Yamaha 01X:
(1) Press the [UTILITY] button on the panel of the 01X.
(2) Press knob [3] ("W.CLK" menu).
(3) Press knob [1] ("Enable") then press knob [8] ("Yes").
Yamaha i88X, mLAN16E (installed in the MOTIF ES/S90ES):
The setup is not necessary.
Yamaha MY16-mLAN (installed in the DM2000, DM1000, 02R96 and 01V96):
Make the setup on the display of the mLAN device so that Card slot to which the MY16-mLAN is inserted is set to the
wordclock master. For details, refer to the manual of each device.
Important:
On this version of the mLAN Driver, keep in mind that only the Macintosh computer can be a wordclock master and any
other mLAN device cannot be a wordclock master.
2
Double-Click the icon illustrated below to start the mLAN Auto Connector.
The following menu appears. You can confirm the connected mLAN devices by selecting "Devices" menu as follows.
mLAN Driver / mLAN Tools for Mac OS X Installation Guide
page
12.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mlanmlan driverMlan tools

Table of Contents