Options - Kyocera FS-3540MFP Set Up And Operation Manual

Options


Sender E-mail: The 'From' E-mail address used to send reports.

SMTP Server: SMTP server address for sending reports by email. Server address could be
specified as an IP Address or host-name.

SMTP Port: SMTP server port (default: 25).

Login: Account used to authenticate to SMTP server.

Password: Password used to authenticate to SMTP server.

Subject: Subject line of email message. This can be changed before sending the email.

Body: Text that will appear in the body of the email.

Grade A ~ Grade D: The percentage thresholds for each grade letter. Default limits are:
Grade
A
B
C
D
F

Scan User and Scan Password: MFP user account used to execute scan job. This must be a local
user account with permission to scan. This account is used only when authentication is enabled
on the MFP. The default username and password are "Admin", "Admin" (note capital letter 'A').

Page Shift: Adjust this value to avoid clipping a portion of the student's name when generating a
report. The default is set to 0. Both positive and negative values can be entered to shift the
clipping area down or up.

Test SMTP: Press the Test SMTP button to validate SMTP settings by sending a test email
message to the sender.
Settings page 3
Value entered at the panel
90
80
70
60
-
26
Meaning
90 % and higher
80 % to 89%
70 % to 79%
60% to 69%
Lower than 60 %