Yamaha Clavinova CVP-601 Owner's Manual page 60

 Rewind/Fast Forward
Press the [REW] or [FF] button once to move back/forward one measure. Hold the
[REW] or [FF] button to scroll backward/forward continuously.
Pressing the [REW] or [FF] button calls up a pop-up window showing the current
measure number (or Phrase Mark number) in the display. While the Song Position
pop-up is shown on the display, you can also use the [DATA ENTRY] dial to adjust
the value.
4
 Adjusting the Tempo
Same procedure as with Style tempo. See page 53.
Restrictions for protected Songs
Commercially available Song data may be copy protected to prevent illegal copying or
accidental erasure. They are marked by the indications at the upper left side of the file
names. The indications and relevant restrictions are detailed below.
• Prot. 1:
Indicates Preset Songs saved to the User tab display and Disklavier Piano Soft Songs.
These cannot be copied/moved/saved to USB flash memory devices.
• Prot. 2 Orig:
Indicates Yamaha-protection-formatted Songs. These cannot be copied. These can be
moved/saved only to the User drive and USB flash memory devices with ID.
• Prot. 2 Edit:
Indicates edited "Prot. 2 Orig" Songs. Make sure to save these to the same folder
containing the corresponding "Prot. 2 Orig" Song. These cannot be copied. These can
be moved/saved only to the User drive and USB flash memory devices with ID.
Note for "Prot. 2 Orig" and "Prot. 2 Edit" Song file operation
Make sure to save the "Prot. 2 Edit" Song to the same folder containing its original "Prot.
2 Orig" Song. Otherwise the "Prot. 2 Edit" Song cannot be played back. Also, if you move
a "Prot. 2 Edit" Song, be sure to move its original "Prot. 2 Orig" Song to the same location
(folder) at the same time. For information about compatible USB flash memory for
saving protected Songs, visit the Yamaha website.
60 CVP-601 Owner's Manual
For Songs not containing Phrase Marks
For Songs containing Phrase Marks
You can switch between BAR and PHRASE MARK by
pressing the [E] button.
NOTE
Phrase Mark is a pre-programmed
marker in certain Song data,
which indicates a specific
location in the Song.
NOTE
You can adjust the Song volume
balance between the Song and
Keyboard. See page 57.
NOTE
In the Mixing Console display,
you can adjust the volume for
each Song part.
NOTE
You can also turn the specific
part(s) on or off. See page 62.
NOTE
You can transpose the Song
playback. See page 42