Asus M4A79T Deluxe - Motherboard - ATX User Manual page 50

5. USB connectors (10-1 pin USB 78; USB910; USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these
connectors, then install the module to a slot opening at the back of the system chassis. These USB
connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
6. Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM,
TV tuner, or MPEG card.
2-30
Chapter 2: Hardware information