Asus M4A79T Deluxe - Motherboard - ATX User Manual page 110

Creating a RAID 0 configuration
To create a RAID 0 set:
1. In the Main Menu, press <2> to enter the "Define LD" function.
2. Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
LD No RAID Mode Total Drv
LD 1 RAID 0
Strip Block: 64 KB
Gigabyte Boundary: ON
Channel:ID
Assignment
1:Mas xxxxxxxxx
2:Mas xxxxxxxxx
3:Mas xxxxxxxxx
4:Mas xxxxxxxxx
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
3. Highlight the LD1 item and press <Space> to select RAID 0.
Move to the Assignment item by using the down arrow key and set Y to any two of the
4.
drives.
5. Press <Ctrl> + <Y> to save the setting. The utility prompts the following messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl> + <Y> to erase MBR or press any key to continue. <Ctrl> + <Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press <Ctrl> + <Y> to key in the desired capacity or press any key to continue. <Ctrl> + <Y> to key in the desired capacity or press any key to continue.
6. The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
LD No RAID Mode Total Drv Capacity(MB) Status
LD 1 RAID 0
LD 2 ----
LD 3 ----
LD 4 ----
LD 5 ----
LD 6 ----
LD 7 ----
LD 8 ----
[↑]Up [↓]Down [ESC]Exit [Enter] Select
4-16
[ Define LD Menu ]
2
Fast Init: OFF
Cache Mode: WriteThru
[ Define LD Menu ]
Drive Model Capacity (MB)
xxxxxx
xxxxxx
xxxxxx
xxxxxx
[ Keys Available ]
to erase MBR or press any key to continue.
to key in the desired capacity or press any key to continue.
[ Define LD Menu ]
2 xxxxxx Functional
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
[ Keys Available ]
Y
Y
N
N
Chapter 4: Software support