Kyocera Mita FS-C8008DN - Color Laser Printer Quick Reference Manual page 9

Message
Format error
Hard disk
Hard disk err ##
Press GO
I/F occupied
ID error
Incorrect slot
Please reinstall
Insert the same
memory card
Corrective Action
The hard disk installed in the printer is not
formatted, and therefore cannot be read or
written. To format the hard disk, follow the
procedure in the Installation Guide of the
hard disk.
A hard disk error has occurred. Look at the
error code given in place of ## and refer to
chapter 4 of the Operation Guide. To ignore
the hard disk error, press the GO key.
This message is displayed when you
attempt to use the printer's operator panel
to change the environmental settings on
the interface from which data are presently
being received.
The user ID entered for a private job, or a
stored job is not correct. Check the user ID
that you specified on the printer driver.
The optional hard disk is installed in the
network interface card slot (OPT) in the
printer.
The optional network interface card is
installed in the hard disk slot (HDD) in the
printer.
Install it in the appropriate slot.
You have inserted the wrong memory card
when the Insert again message was
displayed. Remove the wrong memory
card from the printer's memory card slot
and insert the correct memory card. The
printer again reads it from the beginning of
the data.
7