Kyocera Mita FS-C8008DN - Color Laser Printer Quick Reference Manual page 14

Message
Print overrun
†††
Press GO
RAM disk error##
Press GO
Remove paper
Finisher tray ##
Remove paper
sorter tray
Replace toner
C, M, Y, K
Set paper
Press GO
12
The print job transferred to the printer was
too complex to print on a page. Press the
GO key to resume printing. (The page may
break in some pages.).
You can abandon printing by the CANCEL
key.
If Auto Continue is set to On, printing will
be automatically resumed after a preset
period of time.
A RAM disk error has occurred. Look at
the error code given in place of ## and
refer to chapter 4 of the Operation Guide.
To ignore the RAM disk error, press the
GO key.
Paper remains in an option document fin-
isher as displayed in place of ##. Remove
printed pages.
Paper remains in an option sorter tray as
displayed in place of ##. Remove printed
##
pages.
Toner has run out in the toner container(s).
Replace the toner container using a new
toner kit for the particular color. The printer
does not operate when this message is
displayed.
For example, if Replace toner C,K is
displayed, replace the cyan and the black
toner containers.
The MP tray is out of paper. Load paper
and press the GO key. (Note that feeding
the paper having a paper size which does
not match the current paper size from the
MP tray can cause paper jam.)
Corrective Action