Easy Start; Setup And Projection - Sharp PG-LW3000 Operation Manual

Easy Start

This section shows the basic operation (projector connecting with the computer). For details,
see the page described below for each step.

Setup and Projection

In this section, connection of the projector and the computer is explained using one example.
1. Place the projector facing a wall or a screen
2. Connect the projector to the computer and plug the power
cord into the AC socket of the projector
When connecting equipment other than a computer, see pages
21 and 22.
3. Turn the projector on
Press STANDBY/ON on the projector or ON on the remote control.
14
3
STANDBY/ON
8
button
6
O/Q buttons
6
INPUT buttons
4
Zoom ring
4
Focus ring
4
HEIGHT
ADJUST lever
8
STANDBY button
3
ON button
6
INPUT buttons
5
Adjustment
6
buttons
(P/R/O/Q)
5
KEYSTONE button
_P. 16
_P. 20, 22
25
_P.