Nview Tab (Disabling); Ge Force Tab (Disabling); Displays Tab (Disabling) - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual

nView tab (disabling)

1 Click the nView tab.
2 If you viewed the computer image on your PC monitor and your TV
simultaneously, select nView Display Mode in the list on the left, and then select
the Standard [Dualview] option.
Or
If you viewed the PC image on just the TV, select nView Display Mode in the list
on the left, select Standard [Dualview], click the Device Settings button,
choose Select Output Device, and then select the Analog Display option.
3 Click the OK button.
4 When the PC image appears on the monitor screen, click Yes to keep the
setting. You have 15 seconds to accept this new setting before it reverts to the
previous setting.
5 Click the OK button to save changes, and then click OK again to close the
Display Properties window.

Ge Force tab (disabling)

1 Click the Ge Force FX xxxx tab.
2 In the nView Modes area select Single display from the drop-down list. In the
Current display area select Analog Display or Digital Display.
3 Click the Apply button.
4 When the PC image appears on the monitor screen, click Yes to keep the
setting. You have 15 seconds to accept this new setting before it reverts to the
previous setting.
5 Click the OK button to save changes, and then click OK again to close the
Display Properties window.

Displays tab (disabling)

1 Click the Displays tab. This tab shows a monitor and a TV. (Select models
show a monitor, a standard TV, and an HDTV.) The upper-left corner of each
display icon is a button and a status indicator. A red corner indicates an
inactive display; a green corner indicates an active display.
2 Click the upper-left corner of the TV icon so it is red, and then click the upper-left
corner of the monitor icon so it is green. Click the Apply button.
3 When the PC image appears on the monitor screen, click Yes to keep the
setting. You have 15 seconds to accept this new setting before it reverts to the
previous setting.
4 Click the OK button to save changes, and then click OK again to close the
Display Properties window.
Using a TV as a Monitor
37