HP A1210n - Pavilion - 512 MB RAM Getting Started Manual page 25

A Side speaker port
(side)
B Rear speaker port
(rear)
C Center speaker/
subwoofer port
(c/sub)
D Microphone (mic)
E Audio line out (out) for
front speakers
F Audio line in (in)
The connectors for the 6-connector multi-channel speaker system are on the back of
the PC.
B
A
E
D
Connecting the speaker system to the PC (6-connector)
1 With the speaker system off, assemble the speakers and, if used, the subwoofer.
Refer to the speaker documentation.
2 Turn off the PC.
3 Connect the audio cable plugs from the speaker system subwoofer to the
connectors on the back of the PC. (See the following table.)
Connect speaker cable (plug) for:
Front speakers (or two stereo speakers)
Side speakers
Rear speakers
Center speaker/subwoofer
4 Turn on the PC.
5 Turn on the speaker system.
6 Configure the audio output for this 6-connector multi-channel speaker system by
performing the following procedure.
C
F
To PC port (label, name,
color):
Audio line out (E, out, lime green)
Side speaker (A, side, gray)
Rear speaker (B, rear, black)
Center speaker/subwoofer
(C, c/sub, gold)
19
Setting Up Sound