Xante Accel-a-Writer 8200 Manual page 32

When you create the file, zone names are limited to 32 characters
and should not contain the equal sign (=), the approximately equal
sign ( ), and the asterisk (*). For example, to name your zone
"Marketing - First Floor" using the procedure later in this section,
you would type the following in step 3.
(%EtherTalk_NV%) << /EtherTalkZone (Marketing-First
Floor) >>setdevparams
Note: Check with the system administrator to find out what zone
name to use.
To set the EtherTalk zone name, use the following procedure.
1. Open the TeachText program which came with your
Macintosh.
2. Select New from the File menu.
3. Type the following file substituting the name for the zone used
on your network for nameofzone.
(%EtherTalk_NV%)<</EtherTalkZone(nameofzone)
>>setdevparams
4. Select Save from the File menu, and save the file as Set
Zone.ps on your host system.
5. Select Quit from the File menu to exit TeachText.
6. Insert the Macintosh XANTÉ Utilities disk included with your
printer.
7. Open the Utilities folder.
8. Double-click the Downloader icon to open that utility.
9. Choose Download PostScript File from the File menu.
10. Locate the Set Zone.ps file which you created in step 3.
2-32 Installationbb _________________________________________