Use the following procedure to load the letter/A4 cassette.
1.
Pull the paper cassette straight out from the printer (fig. 2.11).
Fig. 2.11 Remove the Paper Cassette
2.
Prepare up to 250 sheets (approximately 1" [25 mm] thick or
less) of laser quality or 20 lb photocopier paper. To do this:
a.
Make sure the paper meets all the requirements in
"Selecting Media" in chapter 6.
b.
Determine the printing side of the paper. The wrapper on
most paper packages has an arrow pointing in the
direction of the printing side.
c.
Fan the paper to prevent it from sticking together, and
then align the edges to form a smooth stack.
__________________________________________ Installation 2-13