VTech tz 2551-01 User Manual page 7

Installation
4 Charge the Handset Battery.
Place the Handset in the Base. Charge the battery for at least 12 hours the
first time.
5 Check for Dial Tone.
After the batteries are charged, pick up the handset and press PHONE; you
should hear a dial tone.
6 Set the Dial Mode.
If you have touch tone service, the phone is ready to use as soon as the
batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial mode.
• Press PROG/CHAN on the Handset to enter programming mode.
• Press or
currently selected mode.
• Press SELECT. The current setting blinks.
to select TONE or PULSE.
• Press
• Press SELECT to save the displayed mode.
7 Set Time and Date
If you subscribe to Caller ID service, the date and time will be set automatically with the
first incoming call.
If you do not have Caller ID service, you can set the date and time manually.
• Press PROG/CHAN, and then press
Press SELECT.
• The month is flashing. Press
Press SELECT.
• The day is flashing. Press
Press SELECT.
• The hour is flashing. Press
Press SELECT.
• The minute is flashing. Press
Press SELECT.
AM or PM is flashing. Press
•
Press SELECT.
8 Set Language Mode
• Press PROG/CHAN, and then press
Press SELECT.
• The current setting blinks.Press
language( English, Espanol or French ).
Press SELECT to save the language mode.
•
until the screen displays DIAL
or
or until the screen displays the correct month.
or until the screen displays the correct day.
or until the screen displays the correct hour.
or until the screen displays the correct minute.
or
or
or until the screen displays the correct
7
MODE: and the
until DATE/TIME is displayed.
to choose between AM or PM.
until LANGUAGE is displayed.