Input Source Selection - Eiki LC-XA20 Owner's Manual

Input Source Selection (S-Video, Component, RGB Scart 21-pin)
Direct Operation
Choose Computer by pressing the INPUT button on
the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should
be selected through Menu operation as described
below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Input Menu icon.
2
Press the Point
ed
pointer to Computer and then press the SELECT
button.
3
A f t e r t h e S o u r c e S e l e c t M e n u a p p e a r e d
for Computer, move the pointer to S-Video,
Component or RGB (Scart) and then press the
SELECT button.
W h e n S - v i d e o i n p u t s i g n a l i s
S-Video
connected to the COMPUTER IN/
S-VIDEO IN/COMPONENT IN jack,
select S-Video.
When the input source is coming
Component
from video equipment connected
t o t h e C O M P U T E R I N / S - V I D E O
IN/COMPONENT IN terminal with
a C o m p o n e n t - V G A C a b l e , s e l e c t
Component.
When the input source is coming
RGB (Scart)
from video equipment connected to
t h e C O M P U T E R I N / S - V I D E O I N /
COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Note:
✔
When the Input Search function is set On1 or On,
the input signal will be searched automatically
(p.45)
buttons to move the
7 8
buttons to move the red arrow
Top Control
INPUT button
INPUT button
Remote Control
COMPUTER button
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer and
press the SELECT button.
Computer
Source Select Menu
Move the pointer to
S-Video, Component or
RGB (Scart) and press the
SELECT button.
Video Input
Computer
Video
COMPUTER button
Computer
35