Computer Input; Input Source Selection 5 - Eiki LC-XA20 Owner's Manual

Computer Input

Input Source Selection
Direct Operation
Choose Computer by pressing the INPUT button
on the top control or press the COMPUTER button
on the remote control. Before using these buttons,
correct input source should be selected through Menu
operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Input Menu icon.
2
Press the Point
arrow pointer to Computer, and then press the
SELECT button.
3
After the Source Select Menu appeared for
Computer, move the pointer to RGB and then
press the SELECT button.
Note:
✔
When the Input Search function is set On1
or On, the input signal will be searched
automatically (p.45)
buttons to move the
7 8
buttons to move the red
ed
Top Control
Remote Control
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer and
press the SELECT button.
Computer
Source Select Menu
Move the pointer to RGB
and press the SELECT
button.
INPUT button
INPUT button
Computer
Video
COMPUTER button
5