Remote Control - Eiki LC-WB40N Owner's Manual

Remote Control

Remote Control
q
t e
r
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, splay, or any
chemical material.
q L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.15)
w POWER ON/STAND-By button
Turn the projector on or off. (pp.22-23)
e WIRED REMOTE jack
Connect the remote control cable to this jack when using as a wired remote
control. Wireless remote control does not work when the remote control cable is
connected to the projector.
SIGNAL EMISSION indicator
r
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
LASER LIGHT window
t
A laser beam is emitted from here (p.14).
VIDEO button
y
Select the VIDEO input source. (p.40)
w
COMPUTER button
u
Select the COMPUTER input source. (pp.30-31,41)
AUTO PC button
i
Automatically adjust the computer image to its optimum setting. (pp.28,33,47)
K EySTONE button
o
Correct keystone distortion. (pp.26, 48)
Point ed 7 8 ( VOLUME + / – ) buttons
!0
– Select an item or adjust the value in the On-Screen Menu. (p.24)
@6
– Pan the image in the Digital zoom + mode. (p.39)
– Adjust the volume level. (Point 7 8 buttons) (p.27)
@5
MENU button
!1
Open or close the On-Screen Menu. (p.24)
FREEZE button
!2
Freeze the picture on the screen. (p.28)
L ASER button
!3
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p.14)
@4
– Display the Pointer on the screen. (p.14)
PAGE ed buttons
!4
Scroll back and forth the pages on the screen when giving a presentation. To use
@3
these buttons, connect the projector and your computer with a USB cable. (pp.11,
19)
LAMP CONTROL button
!5
@2
Select a lamp mode. (pp.28, 53)
D .ZOOM ed buttons
!6
@1
Zoom in and out the images. (pp.28, 39)
RESET/ON/ALL-OFF switch
!7
When using the remote control, set this switch to "ON." Set it to "ALL OFF" for
@0
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer to the Laser pointer function.
!9
(pp.14-15)
IMAGE button
!8
!8
Select the image mode. (pp.29,36,43)
MUTE button
!9
Mute the sound. (p.27)
P-TIMER button
@0
Operate the P-timer function. (p.29)
NO SHOW button
@1
Temporarily turn off the image on the screen. (p.29)
R-CLICK button
@2
Act as the right mouse button for wireless mouse operation. (p.15)
@3 SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39)
PRESENTATION POINTER button
@4
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)
AUTO SET/CANCEL button
@5
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.26,
47)
– Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's
manual of Memory viewer.
NETWORK button
@6
Select the Network input or Memory viewer input. See owner's manual "Network
Set-up and Operation" and owner's manual of Memory viewer .
Part Names and Functions
.
1