Preparation; Name Of Each Part Of Projector - Eiki LC-W3 Owner's Instruction Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS CAP
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
● Do not put a flammable object near this vent.
● Keep rear grills at least 3.3'(1 m) away from
any object, especially heat-sensitive object.
● Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
TOP CONTROLS
AND INDICATORS
SPEAKERS
POWER CORD
CONNECTOR
LAMP COVER
When attached the Pj-to NetDirector (optional
part) to the projector, remove these parts.
Refer to the owner's manual in the optional
Pj-to NetDirector.
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from
overheating. Pay attention to following to ensure proper
ventilation and avoid a possible risk of fire and malfunction.
● Do not cover vent slots.
● Keep side clear of any objects. Obstructions may block
cooling air.
ADJUSTABLE FEET
FEET LOCK LATCHES
TERMINALS
AND CONNECTORS
AND
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7