Gateway GM5407H Reference Manual page 64

9
10
11
12
13
14
58
CHAPTER 4: Upgrading Your Computer
If your replacement system board does not include a
processor remove the processor from the old system
board by following the directions in
sink and processor" on page
heat sink into the new system board by following the
directions in the same procedure.
Slide the power supply back into the case, then install
the four screws to secure the power supply to the case.
Connect all power and data cables using your notes
from Step 4.
Reinstall any memory modules you removed previously.
Reinstall any expansion cards you removed previously.
Replace the side panel by following the instructions in
"Replacing the side panel" on page
"Replacing the heat
51, then install it and the
40.