Use Of The Mount Accessories - Nextar X3-02 Owner's Manual

When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket and mount cradle) to mount the unit in the vehicle. Take the following steps to
operate:
1. See Fig. 1. Push the mount cradle to mount bracket.
2. See Fig. 2. Fix the unit on mount cradle and bracket.
3. See Fig. 3. Lift the suction fastener, and place the unit on the desired location, then
press down fastener for immobility. Rotate the knob to adjust the unit to proper
position.
If you want to mount the unit to the dashboard, you can use the adhesive disk:
1) Choose a clean, dry spot on your dashboard
2) Peel off protection liner from the back of the disk.
3) Attach the disk to your dashboard.
4) Mount the bracket to the adhesive disk.
Use of Mount
Accessories
21