Table of Contents
Advertisement
Making Calls
•
Press
a
LINE
key
(or,
HANDSFREE to use the
Handset Speakerphone feature).
Dial the phone number.
-OR-
•
Dial the phone number first;
then press a LINE key(or
HANDSFREE).
From the Base Unit
Just like the Handset, you can
either access a dial tone first,
then dial your number, or you
can dial your number first, then
access a line.
•
With both lines idle, pressing
SPEAKERPHONE (or HEADSET if
you are using a headset
connected to the Base) will
access LINE 1.
•
If you want to access LINE 2
with both lines idle, press the
LINE 2 key first, then press
SPEAKERPHONE (or HEADSET).
•
If one line is IN USE, pressing
SPEAKERPHONE (or HEADSET)
will automatically access the idle
line.
•
If both lines are IN USE (2 or
more system Handsets are
active, with at least one on each
line), pressing SPEAKERPHONE (or
HEADSET) will access LINE 1.
NOTE: If LINE 1 is in use, the phone
will automatically select LINE2
when you press HEADSET or
SPEAKERPHONE on the Base.
26
Redial
From either Handset or Base Unit
Each system Handset and Base Unit will remember the last 5 phone numbers
dialed. From the idle mode, press RDL. Scroll until the desired phone number
is highlighted. Then press the appropriate LINE key to dial the number ( follow
the above instructions in Making Calls).
You can also delete and save 'redial' numbers in the Directory.
ERASE
Press RDL. Scroll to the desired phone number, press SELECT, then press
ERASE.
SAVE
Press RDL. Scroll to the desired phone number, press SELECT, then press
SAVE.
You'll then be prompted to ENTER NAME. Use the keypad to enter the letters
of the name. If you make a mistake, press CLR to backspace. To insert a
space, press
. When finished, press SAVE.
For more information on entering phone numbers into the Directory, see the
section entitled Memory.
Answering Calls
From the Handset
Press the appropriate LINE key, or HANDSFREE to use the Handset
Speakerphone option.
If the Handset is active on one line when the idle line rings, you will hear
a special alert tone, signifying an inbound call. This alert is designed to
minimize disruption of the call in progress. You can then:
•
Press OFF twice to end the first call, then answer the new call;
- or -
•
Press the appropriate LINE key to answer the new call. The original
call will automatically be placed on HOLD. You can end the 'new'
call by pressing OFF, then return to the original call by pressing the
appropriate LINE key.
You can also Conference both lines together. See Conference Calling,
further on in this User's Manual.
From the Base Unit
If a line is ringing, pressing SPEAKERPHONE (or HEADSET if you are
using a Headset connected to the Base) will answer the inbound call.
Press SPEAKERPHONE (or HEADSET ) to end your call.
27
Advertisement
Table of Contents
