Setting The File Number - Samsung SC D363 - MiniDV Camcorder With 30x Optical Zoom Owner's Instruction Book

ENGLISH Digital Still Camera Mode
(SC-D363/D364/D365/D366 only)

Setting the File Number

✤ File Number setting works only in <M.Cam> mode. ➥page 19
✤ File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
✤ File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset> : When there are no files stored on the Memory Card,
the file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [MEMORY].
3. Press the [MENU] button.
I
The menu list will appear.
4. Move the [Zoom] lever up or down to select
<Memory>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<File No.>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select desired
option (Series or Reset), then press the [OK]
button.
7. To exit, press the [MENU] button.
72 72
✤
✤
✤
- <Series>
0
- <Reset>
0001
4
M.Cam Mode
√Memory
Memory Type √Memory Card
√Super Fine
Photo Quality
√Series
File No.
Move Select Exit
ZOOM OK MENU
6
M.Cam Mode
Back
Memory Type
Photo Quality
File No.
Series
Reset
Move Select Exit
ZOOM OK MENU
SC-D363/D364/ D365/D366
<M.Cam>
0
1. [Power]
2. [Mode]
0
3. [MENU]
0
I
0
4. [Zoom]
<Memory>
5. [Zoom]
<File No.> [OK]
6. [Zoom]
Series Reset
7. [MENU]
0 ➥
19
0
[CAMERA]0
[MEMORY]
[OK]
0
0
[OK]
0
0