Transporting - Hoover UH20060 Owner's Manual

2-2
ON-Off switch
Plug cord into electrical outlet.
To turn cleaner ON (I), push ON/OFF
switch once.
To turn cleaner OFF (O), push switch
again.
2-5
Retractable handle
The handle is designed to retract into
the body of the cleaner for conve-
nience in storing or carrying. To lower
handle: depress button (B) at handle
base and push handle down. To raise
handle: depress button (B) and pull
handle up until it locks into desired
position.
2-8
Handle positions
The handle of your cleaner has three
positions; upright for storage and
when using cleaning tools; operating
position for general operation on
carpet and floors; low for reaching
under low furniture. Step on hood to
lower handle.
6
2-3
A
The cleaner is shipped with the agita-
tor brushroll in the BARE FLOOR
position. To turn the agitator brushroll
on for CARPET, step on the pedal (A).
2-6
B
transporting cleaner
To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels and
push forward.
2-9
C
floating nozzle
carpet height
adjustment
The cleaning of carpet and rugs takes
place at the nozzle (C).
The nozzle "floats" for adjustment to
various carpet heights and hard
surface floors.
2-4
Handle positions
The handle has two positions: upright
and operating.
To lower handle to operating position,
place your foot firmly on the cleaner
hood and pull handle back.
2-7
Carrying cleaner
The cleaner can also be moved by
using the carrying handle.
2-10
A
agitator brushroll
on-off
To shut the agitator brushroll off for
cleaning hard floors, step on the
pedal (A). To turn the agitator brushroll
on for carpet cleaning, step on the
pedal again.