Using Your Cleaner - Bissell PowerForce Compact User Manual

O
perations

Using your cleaner

1. For first time use, remove the plastic
plug guard and dispose.
2. Rotate the Quick Release cord wrap
towards floor and slip power cord from
upper and lower cord wraps.
3. Connect power cord plug to a
polarized outlet.
4. To keep the power cord out of your
way while cleaning, place it in the
cord hook by the top of the vacuum.
Power Switch pedal
The red power switch pedal is located
on the back of the cleaner, under the
cord wraps.
1. Step on the power switch to turn the
unit "On". The rotating floor brush and
suction will start.
2. Step on the pedal again to turn the
vacuum "Off".
w w w . b i s s e l l . c o m
Power
Switch
Pedal
Tip:
Before cleaning under low furniture, check
for objects that might block the vacuum
hose. Do not pick up hard or sharp
objects such as glass, nails, screws, coins,
paper clips, etc. with vacuum.
CaUTION:
Before using your vacuum, make
sure that all filters (pre-motor
and post-motor) are in place.
Do not operate your vacuum
without the filters.
8 0 0 . 2 3 7 . 7 6 9 1
Cord
Hook
Quick
Release
Cord
Wrap
Product
images
may vary
7