Backup Battery Installation - VTech SkillStarter Handheld User Manual

adaptor for 15 seconds. Next, plug the adaptor back in and turn the
unit ON. If the problem persists, it may be the result of the adaptor's
wiring or the unit.
Do not leave the adaptor plugged in for long periods of time if the unit is
not in use.
Standard for adaptor toys
• The toy is not intended for use by children under 3 years old;
• Only use the recommended adaptor with the toy;
• The adaptor is not a toy;
• Never clean a plugged-in toy with liquid;
• Never use more than 1 adaptor;
• Do not leave plugged-in for extended periods of time.
NOTICE TO PARENTS
Regularly examine the adaptor, checking for damage to the cord, plug, transformer
or other parts. Do not use the adaptor if there is any damage to it.

BACKUP BATTERY INSTALLATION

SkillStarter™ Handheld comes with a backup battery already installed. Before
using the unit, remove the protective strip from the backup battery by pulling on
the plastic tab. To avoid damage to the unit from leaky batteries, replace the
backup battery at least once a year.
To replace the backup battery:
1. Make sure the unit is OFF.
2. Locate the battery cover on the back of the
handheld and open it.
3. Remove the old backup battery with a
screwdriver.
4. Insert 1 CR2032 battery as illustrated.
5. Close the battery cover and tighten the screw
to secure the battery cover.
4