Backup Battery Installation - VTech DOUBLE VISION NOTEBOOK User Manual

BACKUP BATTERY INSTALLATION

Your Double Vision Notebook™ comes with a backup battery already
installed. To avoid damage to the unit from leaky batteries, replace the backup
battery at least once a year.
1. Make sure the unit is OFF.
2. Using a small screwdriver, loosen the battery cover.
3. Insert 1 CR2032 sized battery as illustrated.
4. Close the battery cover and tighten the screws to secure it.
NOTE:
TO REPLACE THE BACKUP BATTERY
IMPORTANT: While replacing the backup battery, the 4 "AA" sized batteries must be kept
in the unit. Otherwise, you will lose any saved information stored on the unit.
BATTERY NOTICE
- The use of new alkaline batteries is recommended for maximum performance;
- Do not try to recharge non-rechargeable batteries;
- Rechargeable batteries are to be removed from the toy before being charged;
- Rechargeable batteries are only to be charged under adult supervision;
- Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium);
- Do not mix new and used batteries;
- Only use batteries of the recommended or equivalent type;
- Always insert batteries properly matching the plus (+) and minus (-) signs;
- Batteries that have run out of energy must be removed from the toy;
- Batteries are to be inserted with correct polarity;
- Do not short-circuit the supply terminals;
- Do not use more batteries than recommended;
- Remove batteries from the toy if it will not be used for an extended period of time.
- Do not dispose of batteries in fire.
Notice : When Double Vision Notebook™ is on, you may see this icon appear on the
screen
the batteries soon.
5
. This indicates that battery power is low, and you should replace