Getting Started; Power Source; Connecting The Printer; Battery Installation - VTech SkillStarter Handheld User Manual

GETTING STARTED

Locate on the back of your SkillStarter™ Handheld. Remove the red
tab so the information you input will be saved.

POWER SOURCE

SkillStarter™ Handheld operates on 3 "AAA" size batteries (UM-4 or LR03) or
a VTech® 9V adaptor (sold separately).

CONNECTING THE PRINTER

1. Make sure both the SkillStarter™ Handheld and the VTech® VT-41 printer
(sold separately) are turned OFF.
2. Locate the printer port on the back of the keyboard docking.
3. Connect the printer plug to the printer port.
4. Turn on SkillStarter™ Handheld and the printer.
NOTE: Only the VTech® VT-41 printer is compatible with SkillStarter™
Handheld.

BATTERY INSTALLATION

1. Make sure the SkillStarter™ Handheld is OFF.
2. Open the battery cover on the back of the handheld.
3. Insert 3 new "AAA" batteries into the battery
compartment as illustrated.
Rechargeable batteries are not recommended.
4. Close the battery cover and tighten the screw to
secure the battery cover.
2