Table of Contents
Advertisement
Using the "Options" Menu (Continued)
4 Setting On-screen Display
4
4
4
4
Selectable
items
On
All On-screen Displays are displayed.
Off
INPUT/FREEZE/AUTO SYNC/RESIZE/
PICTURE MODE are not displayed.
5 Setting the Video
5
5
5
5
System
This function can only be set in INPUT 3 or
INPUT 4.
The video input system mode is factory preset
to "Auto";however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Selectable items
When connected to PAL video
PAL
equipment.
When connected to SECAM
SECAM
video equipment.
When reproducing NTSC
NTSC4.43
signals in PAL video equipment.
When connected to NTSC video
NTSC3.58
equipment.
48
EIP-1600T_EN_k
This function allows you to select the input sig-
Description
nal type (RGB or Component) for INPUT 5 or
INPUT 6.
Description
When there is an HDMI-capable device con-
nected to INPUT 6, an optimum picture may not
be displayed if the device's output signal type
and the projector's input signal type do not match.
If this should occur, switch the HDMI Setting.
48
Menu operation n Page 41
6 Signal Type Setting
6
6
6
6
Selectable items
Description
Auto
Automatically selects the
appropriate input signal
between RGB and Component.
RGB
Set when RGB signals are
received.
Component
Set when component signals
are received.
Note
• You can also select "Signal Type" using g
RGB/COMP. on the remote control (INPUT 5
or INPUT 6).
7 Selecting the HDMI Setting
7
7
7
7
Selectable items
Description
Standard
When the black levels of the
image show banding or appear
faded, select the option that
results in the best picture
Enhanced
quality. (In most circumstances,
"Standard" should be selected.)
Note
• The HDMI Setting can be selected only when
INPUT 6 is selected.
8 Selecting the Background
8
8
8
8
Image
Selectable items
Blue
Blue screen
None
— (Black screen)
06.1.24, 1:08 PM
Description
Advertisement
Table of Contents
