Table of Contents
Advertisement
Selecting the Type of
Correction
Select the Keystone correction method.
Press c KEYSTONE on the remote control.
• "GEOMETRIC ADJUSTMENT" will be
displayed.
• Each time c KEYSTONE is pressed, the
display toggles as follows:
GEOMETRIC
ADJUSTMENT
The display disappears.
GEOMETRIC
For correcting an image by
ADJUSTMENT
designating the corner of the
projected image.
(See page 34.)
H & V
For correcting an image by
KEYSTONE
designating the horizontal or
vertical axes. (See page 35.)
EIP-1600T_EN_h
• When corrections are made with Keystone cor-
• Since Keystone correction digitally corrects
• If you cannot correct trapezoidal distortion with
• Straight lines and the edges of the displayed
H & V KEYSTONE
• Also read "About Copyrights" on page 37.
33
Note
rection, the changes are saved even if the
power cord is unplugged.
the signal, resolution may slightly decrease
when it is used. Moiré patterns and line dis-
tortions may also be visible in detailed images.
However, this is not a malfunction.
Keystone correction, change the placement
position of the projector.
image may appear jagged, when adjusting the
Keystone setting.
06.1.24, 1:05 PM
33
Advertisement
Table of Contents
