Tools Needed - Ryobi P551 Operator's Manual

FEATURES
SWITCH TRIGGER
switch
See Figure 4.
Lock
The saw will not start until you depress the switch lock with
your thumb then squeeze the switch trigger. To prevent
unauthorized use of the compound miter saw, remove the
battery pack, and lock the switch in the off position. To lock
switch
padLock
the switch, install a padlock (not included) through the hole
trigger
in the switch trigger. A lock with a long shackle of 5/16 in.
diameter may be used. When the lock is installed and locked,
the switch is inoperable. Store the padlock key in another
location.
Fig. 4

TOOLS NEEdEd

The following tools (not included) are needed for making adjustments or installing the blade:
coMbination square
fraMing square
Fig. 5
10