Lenovo ThinkServer RD240 User Manual page 94

Table 21. Items under the PCIPnP menu (continued)
Item
LAN1 OP-ROM
LAN2
LAN2 OP-ROM
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 22. Items under the Boot menu
Item
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
CD/DVD Drives
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 23. Items under the Security menu
Change Supervisor Password
Change User Password
Note: The settings in [ ] are the default settings in the Setup Utility program.
82
ThinkServer User Guide
[Enabled] / Disabled
[Auto] / Enabled / Disabled
[Enabled] / Disabled
Sub-item
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
1st Boot Device
2nd Boot Device
1st Drive2nd Drive...
1st Drive...
Item
Option
Enable or disable the wake-up from
LAN 1.
The Auto option means to
automatically enable the integrated
Ethernet controller 2. The Enabled
option means to enable the integrated
Ethernet controller 2. The Disabled
option means to disable the integrated
Ethernet controller 2.
Enable or disable the wake-up from
LAN 2.
Option
[Disabled] / Enabled
[Enabled] / Disabled
[Force BIOS] / Keep Current
[Off] / On
Boot device names
Boot device names
Set or change the supervisor password. The password
can be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Set or change the user password. The password can
be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Description
Description
Enable or disable the quick
boot feature.
Enable or disable the
feature to show OEM Logo
during the POST.
Set the AddOn ROM
Display Mode.
Set the Num-Lock LED
state.
Set the startup device
sequence (support at most
five startup devices).
Based on the installed hard
disk drives.
Based on the installed
optical drives.
Description