Lenovo ThinkServer RD240 User Manual page 60
(english) installation and user guide
Hide thumbs
Also See for ThinkServer RD240:
- Software user's manual (364 pages) ,
- Hardware maintenance manual (166 pages) ,
- Benutzerhandbuch (156 pages)
Table of Contents
Advertisement
6. Connect the mini SAS signal cables to the RAID controller and the backplane.
Note: Use the two 440 mm (17.32 inches) mini SAS signal cables.
Figure 38. Connecting the mini SAS signal cables
1
Ports 0-3
2
Ports 4-7
a. For one mini SAS signal cable, connect one end to the ports 0-3 on the RAID controller. Then,
connect the other end to the mini SAS signal connector
b. For the other mini SAS signal cable, connect one end to the ports 4-7 on the RAID controller. Then,
connect the other end to the mini SAS signal connector
Figure 39. Mini SAS signal connectors on the backplane
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 71.
48
ThinkServer User Guide
2
on the backplane.
1
on the backplane.
Advertisement
Table of Contents
