Lenovo ThinkServer RD240 User Manual page 93

Table 18. Submenus under the IPMI 2.0 Configuration (continued)
Item
BMC Watch Dog Timer
Action
BMC Alert LED and Beep
FW key
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 19. Submenu under the Intel VT-d Configuration
Item
Intel VT-d
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 20. Submenus under the Remote Access Configuration
Item
Remote Access
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 21. Items under the PCIPnP menu
Item
Clear NVRAM
Boots Graphic Adapter Priority
LAN1
Sub-item
[Disabled] / Reset System /
Power Down / Power Cycle
[Off] / On
[0000000]
Option
Disabled / [Enabled]
Option
[Disabled] / Enabled
Option
[No] / Yes
[Auto] / Onboard VGA
[Auto] / Enabled / Disabled
Option
Disable or enable the OS
based dongle. If enabled,
whenever any problems
arising from the operation
system, such as the
system halted, the system
management feature will
take actions of Reset
System, Power Down, or
Power Cycle at the prompt
of the dongle Timer.
Turn on or turn off the BMC
alert LED and beep.
Description
Enable or disable the virtualization
technology for I/O devices.
Description
Enable or disable the serial port
remote access.
Description
If this option is set to Yes, that means
to clear the NVRAM information when
the system starts up.
If this option is set to Auto, the
external graphics card will be enabled
firstly. If no external graphics card,
the integrated graphics controller is
automatically enabled. If this option
is set to Onboard VGA, only the
integrated graphics card is enabled.
The Auto option means to
automatically enable the integrated
Ethernet controller 1. The Enabled
option means to enable the integrated
Ethernet controller 1. The Disabled
option means to disable the integrated
Ethernet controller 1.
.
Chapter 6 Configuring the server
Description
81