Sound Volume Adjustment; Sound Mute Function; Zoom Adjustment; Focus Adjustment - Eiki Multimedia Projector LC-X1UA Owner's Instruction Manual

SOUND VOLUME ADJUSTMENT

Press the VOLUME buttons (located on remote control unit or on the projector)
to adjust the volume. The volume display will be displayed on the screen for a
few seconds.
Pressing volume (÷) will increase volume and increase the number on the screen.
Pressing volume (-) will decrease volume and decrease the number on the
screen.

SOUND MUTE FUNCTION

Pressing the MUTE button on the remote control unit will mute audio. Press the
MUTE button again to restore audio to its previous level. The mute display will
be displayed on the screen for a few seconds.

ZOOM ADJUSTMENT

Press the ZOOM (+) or (-) button to obtain your desired picture size. For a larger picture,
press (+) and for a smaller picture, press (~—).
ZOOM ADJUSTMENT
and press POINT UP/DOWN button(s) to obtain your desired picture size. The
Zoom display will be displayed on the screen for a few seconds. For a larger
picture, press (UP) and for a smaller picture, press (DOWN).

FOCUS ADJUSTMENT

Press the FOCUS (+) or (-) button for a sharper, crisper picture.
FOCUS ADJUSTMENT
Press the FOCUS button and press POINT UP/DOWN button(s) to obtain a sharper,
crisper picture. The Focus display will be displayed on the screen for a few seconds.

LENS SHIFT FUNCTION

Press the LENS SHIFT (+) or (-) button to obtain your desired screen position.
LENS SHIFT FUNCTION
Press the LENS SHIFT button and press POINT UP/DOWN button(s) to obtain your
desired screen position. The Lens shift display will be displayed on the screen for a few
seconds.

NORMAL PICTURE FUNCTION

The normal picture level is factory preset on the projector and can be restored anytime by
pressing the NORMAL button (located on remote control unit or on the projector). The
"Normal" display will be displayed on the screen for a few seconds.

NO SHOW FUNCTION

Press the NO SHOW button on the remote control unit. The screen will change into black image and the "NO SHOW'
is displayed on the screen for a few seconds.
This function is cancelled when the NO SHOW button is pressed again or any other
function button is pressed.

P-TIMER FUNCTION

Press the P-TIMER button on the remote control unit. The timer display "00:00" appears
on the screen and the timer starts to count the time (00:00-59:59). Press again the P-
TIMER button to stop the timer. Then press the P-TIMEA button to cancel the P-TIMER
function.

FREEZE PICTURE FUNCTION

Press the FREEZE button on the remote control unit, and the picture will remain on-screen. This function is cancelled
when the FREEZE button is pressed again or any other function button is pressed.
NOTE: Your computer or video equipment is not affected by this function, and will continue to run.

AUTO IMAGE FUNCTION

Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated "ON" in the
AUTO IMAGE FUNCTION are adjusted automatically.
If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to
operate the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTO IMAGE FUNCTION" section on page
39.
(Top control and Wireless/Wired remote control unit)
(Wireless remote control unit) Press the ZOOM button
(Top control and Wireless/Wired remote control unit)
(Wireless remote control unit)
(Top control and Wireless/Wired remote control unit)
(Wireless remote control unit)