No Show Function; Picture Freeze Function; P-Timer Function; Sound Adjustment - Eiki LC-SM2 Owner's Manual

Eiki multimedia projector owner's manual

Table of Contents

BASIC OPERATION

Press the NO SHOW button on the Remote Control Unit to black out the

image. This function is cancelled when the NO SHOW button is pressed

again or any other function button is pressed.

Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. This function is cancelled when the

FREEZE button is pressed again or any other function button is pressed.

Press the P-TIMER button on the Remote Control unit. The timer display "00

: 00" appears on the screen and the timer starts to count the time (00 : 00 59

: 59).To stop the P-TIMER, press the P-TIMER button. And then, press the

P-TIMER button again to cancel the P-TIMER function.

Press the VOLUME (+/—) button on the Remote Control Unit to adjust

the volume. The Volume dialog box appears on the screen for a few

seconds. The VOLUME (+) button increases the volume, and the

VOLUME (—) button decreases the volume. The sound volume can be

adjusted through the ON-SCREEN MENU. (Refer to page 32.)

Press the MUTE button on the Remote Control Unit to mute the sound.

To restore the sound to its previous level, press the MUTE button again

or press the VOLUME (+1—) button .The sound mute can

be set through the ON-SCREEN MENU.(Refer to page 32.)

NO SHOW FUNCTION

Table of Contents

Lc-sm1