Kyocera KM-6330 Operation Manual page 86

2. Windows KX Driver
I Folding Unit
When the optional Folding Unit is installed, you can eject the copies into the designated Folding tray.
The following settings are required before you use the Folding unit.
(1) "Device Options" setting in the "Device Settings" Tab
Select [Multi Finisher] and then select the [Folding Unit].
(2) In the "Output" Tab
Select [Folding Tray] as the "Output to" setting.
Note
When [Folding Tray] is selected as the "Output to" setting, "Booklet Stitch" is selected automatically.
I Multi Tray
When the optional Multi Tray is installed, you can eject the copies into the designated Multi tray.
The following settings are required before you use the Multi tray.
(1) "Device Options" setting in the "Device Settings" Tab
Select [Multi Finisher] and then select the [Multi Tray].
(2) In the "Output" Tab
Select [Tray 1,2,3,4,5 (Face-down)] or [Tray 1,2,3,4,5 (Face-up)] as the "Output to" setting.
Note
When [Multi Tray] is installed, [Tray B] of the optional Multi Finisher will be [Tray 5].
I Job Settings...
Clicking on the [Job Settings...] button opens up the [Job Settings] dialog box from which you can print out using the e-MPS (Job Storage)
function. For details, see "2-6-1 Printing using the e-MPS function" on page 2-12.
2-11