Scanning From A Twain-Compatible Application - Kyocera KM-6230 Instruction Handbook Manual

2-1 Scanning from a TWAIN-Compatible Application

Using a TWAIN-compatible application to control the scanning operation at the scanner is one standard
method of scanning images into a computer. This scanner is not only TWAIN-compatible but is even
further advances in enabling this operation to take place over a network. This section of this Handbook
contains explanations on using a TWAIN-compatible application for scanning purposes.
IMPORTANT!
In order to use this method of scanning, the TWAIN source must be installed in the corresponding
computer. If there are going to be multiple computers using this capability, the TWAIN source
should be installed in each of those computers.
1
Perform the desired settings
for the TWAIN mode.
Scanner
Computer
2
Set the original.
5
Scanning Request
6
Scanned Image Data
Transmission
Page 2-2
7
Display of
the Scanned Image
Select the Size of the Original
4
and Desired Resolution
in the TWAIN Source.
3
Select the Scanner from the
TWAIN-Compatible Application.