Table of Contents
Advertisement
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE CABINET
PROJECTION LENS
ZOOM RING
FOCUS RING
SPEAKER
(Monaural)
LENS COVER
INFRARED
REMOTE RECEIVER
BACK OF THE CABINET
TERMINALS
AND CONNECTORS
BOTTOM OF THE CABINET
LAMP COVER
AIR INTAKE VENTS
AND AIR FILTERS
These Air Intake Vents
should not be blocked.
AIR INTAKE VENTS
(Both sides and rear)
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover the vent slot.
Keep sides and rear clear of any
obstructions. Obstructions may block
cooling air.
POWER CORD CONNECTOR
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
Do not put a flammable object near this
vent.
Keep the side grills at least 3' (1m) away
from any object, especially heat-sensitive
object.
Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
Advertisement
Table of Contents
