Projection Methods - Epson Dreamino EMP-TW20 User Manual

Projection methods

Projection methods
When projecting from directly in front
When projecting from a celling
Avoid setting the projector up in places which are very dusty such as bedrooms.
Clean the air filter at least once every 3 months.
Clean the air filter more frequently if using the projector in a dusty environment.
TIP
When installing against a wall, leave a space of 20 cm (7.9 in.) or more between the projector
and the wall.
A special method of installation is required in order to suspend the projector from the ceiling.
Please contact your dealer if you would like to use this installation method.
H×25%
H×17% H
1/2V 1/2V
1/2H 1/2H
Standard projection
Range that the picture can
position be shifted from the standard
(centre position for lens shift)
When suspending the projector from a ceiling,
change the configuration menu settings.
Configuration menu
Setting
H×25%
H×17%
V×50%
V×36%
V
V×36%
V×50%
projection position
When projecting from the side of the screen
Screen
*You cannot shift the image by the full amount
both vertically and horizontally.
Ex) When the image is shifted horizontally
by the full amount, it cannot be shifted
vertically by more than 36 % of its
height.
And when the image is shifted vertically
by the full amount, it cannot be shifted
horizontally by more than 17 % of its
width.
Setting up
Projection
Front
Front/Ceiling
11