Appendix; Wireless Mouse - Eiki LC-X71 Owner's Manual

Eiki multimedia projector owner's manual model lc-x71 lc-x71l lensless
Hide thumbs Also See for LC-X71:
Table of Contents

Advertisement

APPENDIX

Remote control is not only able to operate this projector but also functions as a wireless mouse for most
personal computers. The MOUSE POINTER, DRAG ON/OFF button, and two CLICK buttons are used for
wireless mouse operation.
The Wireless mouse function is available only when the PC mouse pointer is displayed on the screen.
To use the remote control as a wireless mouse for a computer, installation of a mouse driver (not supplied) is
required. Make sure that the mouse driver is properly installed on your computer and that the mouse port (or
USB port) of the computer is activated.
1
Connect the mouse port (or USB port) of your computer to the
CONTROL PORT (or USB connector) of this projector with
the Control cable (or USB cable). (See pages 12 and 13 for
connection.)
2
Turn on the projector first, and then turn your computer on. If
the computer is switched on first, the Wireless mouse function
may not work properly.
When controlling the PC mouse pointer, use the MOUSE POINTER, DRAG ON/OFF button, LEFT CLICK
button, and RIGHT CLICK button on the remote control.
MOUSE POINTER
Used to move the PC mouse pointer. The pointer moves to the
direction you are pressing.
LEFT CLICK button
This button has the same function as the left button in a PC mouse.
To drag a selected screen object, hold down this button and press
the MOUSE POINTER.
RIGHT CLICK button
This button has the same function as the right button in a PC
mouse.
DRAG ON/OFF button
Use this button and the MOUSE POINTER to drag a selected
screen object. Press and release the DRAG ON/OFF button, then
the DRAG ON INDICATOR lights green and the remote control is in
Drag mode. Use the MOUSE POINTER to drag an screen object.
Press and release the DRAG ON/OFF button again or press any
other button to drop the object.

WIRELESS MOUSE

INSTALLATION
OPERATING WIRELESS MOUSE
Note: When your computer has no mouse port,
connect the Serial port of your computer to
the Control port of the projector with the
Control cable for Serial port (supplied).
DRAG ON
INDICATOR
DRAG ON/OFF
button
MOUSE POINTER
(Moves the pointer)
LEFT CLICK button
RIGHT CLICK button
(left button of the mouse)
(right button of the mouse)
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-x71l

Table of Contents