Top Controls And Indicators - Eiki LC-X71 Owner's Manual

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
EXT. SP SWITCH
Used to select speakers.
(Internal or External)
MENU BUTTON
Used to open or
close the On-Screen
Menu. (p.18, 19)
ZOOM BUTTON
Used to adjust zoom.
(p.22)
FOCUS BUTTON
Used to adjust focus.
(p.22)
LENS SHIFT BUTTON
Used to select the Lens
Shift function. (p.22)
LAMP REPLACE INDICATOR
Turns to yellow when the
projection lamp reaches its
end of life.
Blinks yellow when the
lamp cannot light up. (p.48,
55-56)
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust a
value in On-Screen Menu. They are
also used to pan the image in the
DIGITAL ZOOM +/– mode. (p.30)
The POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
(p.23)
SELECT BUTTON
Used to execute the
selected item. It is also
used to expand/compress
the image in the DIGITAL
ZOOM mode. (p.30)
BEFORE OPERATION
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (p.20, 21)
WARNING TEMP. INDICATOR
Blinks red when the internal
temperature of the projector
is too high. (p.46, 55-56)
TOP CONTROLS AND
INDICATORS
INPUT BUTTON
Used to select an input
source. (p.24, 31)
AUTO PC ADJ. BUTTON
Used to operate the Auto
PC Adjustment function.
(p.26)
IMAGE BUTTON
Used to select the
image level. (p.29, 33)
KEYSTONE BUTTON
Used to correct
keystone distortion.
(p.21, 37)
LAMP INDICATOR
Becomes dim when the
projector is turned on.
And it becomes bright
when the projector is in
stand-by mode. (p.20,
21, 55-56)
READY INDICATOR
Lights green when the
projector is ready to be
turned on. And it blinks
green in the Power
management mode.
(p.40, 46, 55-56)
17